Page 109 - Phoenix-Spring-Steel-Catalog-6-19
P. 109

 Technical DaTa
    Metal Clad Cable (MC)
  AWG Size
  Nominal Outer Diameter in Inches
 Insulated Ground
  Bare Ground
     14-2 Solid 14-4 Solid 12-3 Solid 10-2 Solid 10-4 Solid
0.450 in. 0.510 in. 0.530 in. 0.560 in. 0.645 in.
0.430 0.485 0.500 0.520 0.615
in. in. in. in. in.
8-2 Strd. 8-4 Strd. 6-3 Strd. 4-2 Strd. 4-4 Strd. 2-3 Strd.
Dimensions taken from ANSI B1.1 1982 Unified Inch Screw Threads. All threads are UNCR series.
0.675 in. 0.770 in. 0.800 in. 0.895 in. 1.035 in. 1.075 in.
Tabulated loads are based on an allowable tensile stress of 12000 psi reduced by 25% resulting in 9000 psi. From ANSI/MSS SP-58, Table 3
AWG Size
Nominal Outer Diameter in Inches
  Insulated Ground
Bare Ground
    14-3 Solid
  0.480 in.
  0.435 in.
      8-3 Strd.
0.770 in.
0.710 in.
     12-2 Solid
  0.495 in.
  0.465 in.
    6-2 Strd.
0.795 in.
0.755 in.
     12-4 Solid
  0.565 in.
  0.560 in.
    6-4 Strd.
0.945 in.
0.865 in.
    10-3 Solid
  0.600 in.
  0.550 in.
    4-3 Strd.
1.035 in.
0.945 in.
        All Threaded Rod (ATR)
0.710 in. 0.835 in. 0.865 in. 0.945 in. 1.135 in. 1.180 in.
2-2 Strd.
1.075 in.
1.015 in.
      2-4 Strd.
1.295 in.
1.180 in.
  Nominal Size and Thread
  Root Area
   Design Load (SF = 5)
      1/4" - 20
3/8" - 16
0.027 in. 0.068 in.
22 0.174 cm
22 0.438 cm
240 lbs.
610 lbs.
1.07 kN
2.71 kN
 5/16" - 18
  0.045 in.
2
  0.290 cm2
  400 lbs.
  1.78 kN
    ELECTRICAL SUPPORTS CATALOG
www.phoenixsupports.com
Page [109]
  Technical STruT ceiling anD STuD Wall STrucTural conDuiT anD inTroDucTion DaTa acceSSorieS acouSTical aTTachmenT cable SupporT



























   107   108   109   110   111