F B18 C CP – Box And Conduit Support With Flange Clip and Conduit Clips
- For support of conduit per NEC344.30(B)
- STS8 low profile screws recommended for installation
- For wet or dry applications
- Hammer-on flange clip for easy install
- Hammer-on flange clip for single use only
- Not to be used on tapered flanges
- Two screws are required when mounting box to B18 support
- Not for fixture or ceiling fan support
Catalog Number | Description | Flange Thickness | Conduit Size | Box Qty. |
F2-4 B18 C6 * | Box Support with flange clip hammer on and snap close conduit clips | 1/8″ – 1/4″ | 3/8″ Flexible Conduit | 25 |
F5-8 B18 C6 * | Box Support with flange clip hammer on and snap close conduit clips | 5/16″ – 1/2″ | 3/8″ Flexible Conduit | 25 |
F2-4 B18 C8-12 | Box Support with flange clip hammer on and snap close conduit clips | 1/8″ – 1/4″ | 1/2″ or 3/4″ EMT, Rigid | 25 |
F5-8 B18 C8-12 | Box Support with flange clip hammer on and snap close conduit clips | 5/16″ – 1/2″ | 1/2″ or 3/4″ EMT, Rigid | 25 |
F2-4 B18 C16 | Box Support with flange clip hammer on and snap close conduit clips | 1/8″ – 1/4″ | 1″ EMT, Rigid | 25 |
F5-8 B18 C16 | Box Support with flange clip hammer on and snap close conduit clips | 5/16″ – 1/2″ | 1″ EMT, Rigid | 25 |
F2-4 B18 CP8 * | Box Support with flange clip hammer on and push-in conduit clips | 1/8″ – 1/4″ | 1/2″ EMT | 25 |
F5-8 B18 CP8 * | Box Support with flange clip hammer on and push-in conduit clips | 5/16″ – 1/2″ | 1/2″ EMT | 25 |
F2-4 B18 CP12 * | Box Support with flange clip hammer on and push-in conduit clips | 1/8″ – 1/4″ | 3/4″ EMT or 1/2″ Rigid | 25 |
F5-8 B18 CP12 * | Box Support with flange clip hammer on and push-in conduit clips | 5/16″ – 1/2″ | 3/4″ EMT or 1/2″ Rigid | 25 |
F2-4 B18 CP16 * | Box Support with flange clip hammer on and push-in conduit clips | 1/8″ – 1/4″ | 1″ EMT or 3/4″ Rigid | 25 |
F5-8 B18 CP16 * | Box Support with flange clip hammer on and push-in conduit clips | 5/16″ – 1/2″ | 1″ EMT or 3/4″ Rigid | 25 |
*Not a UL Listed Product
- Material: Pregalvanized Steel, Spring Steel
- Finish: VG – Phoenix Vanguard
Phoenix Vanguard coating is a multi-step process that meets the 1000 hour salt spray test per ASTM B117 and DIN 50021.Vanguard coating is WEEE, ELV and RoHS compliant. VG Finish is approved for outdoor as well as indoor applications. It is a chrome free duplex coating system that combines an inorganic zinc-rich basecoat with an aluminum-rich organic topcoat.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov