PCH PCH – Pipe & Conduit Hanger with Pipe & Conduit Hanger
- Supports conduit and pipe from 1″ O.D. computer floor pedestals.
- Retained combo head screw allows Robertson, Phil- lips/Slotted and Hex drivers.
- Conduit clip rotates 360 degrees.
- Standard finish is Galvanized Steel, Also available in 304 and 316 Stainless Steel.
| Catalog No. | Trade Size | EMT Conduit Size | Rigid Conduit Size | Box Qty |
| PCH1-0 | 0 | 1/2″ | 3/8″, 1/2″ | 50 |
| PCH1-1 | 1 | 3/4″ | 3/4″ | 50 |
| PCH1-2 | 2 | 1″ | 1″ | 50 |
| PCH1-2.5 | 2.5 | 1-1/4″ | – | 50 |
| PCH1-3 | 3 | 1-1/2″ | 1-1/4″ | 50 |
- Material: Steel
- Finish – Fitting: PG – Pre-galvanized Zinc
ASTM A653 G-90 Pre-galvanized zinc is produced by continuously rolling steel coils or sheets through molten zinc at the mills. The coils or sheets are slit to size and fabricated by forming, shearing or punching to produce the finished product. During fabrication cut edges are not generally zinc coated; however, the zinc near the uncoated metal becomes a sacrificial anode to protect the bare areas.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov