RSB – Support with Metal Channel

  • Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified.
  • Holes are 9/16″ [14.3] diameter, 13/16″ [20.6] center to edge on 1-7/8″ [47.6] centers unless specified
Part No. Weight. (lbs) No. 
of Bases
Height Strut
Length
Total
Length
Uniform Load
Lbs (kN)
RSB-Support With 13/16″ Pre-Galv. 14 Gauge Steel Channel
RSB 1081PG 4.8 1 4-7/8″ 10″ 11″ 1,000 (4.4)*
RSB22481PG 9.7 2 4-7/8″ 22″ 23″ 2,000 (8.8)*
RSB33681PG 14.6 3 4-7/8″ 34″ 35″ 3,000 (13.3)*
RSB44881PG 19.5 4 4-7/8″ 46″ 47″ 4,000 (17.8)*
RSB-Support With 1-5/8″ Pre-Galv. 12 Gauge Steel Channel
RSB 1016PG 5.5 1 5-11/16″ 10″ 11″ 1,000  (4.4)*
RSB22416PG 11.4 2 5-11/16″ 22″ 23″ 2,000 (8.8)*
RSB33616PG 17.2 3 5-11/16″ 34″ 35″ 3,000 (13.3)*
RSB44816PG 23 4 5-11/16″ 46″ 47″ 4,000 (17.8)*
RSB Support With 2-7/16″ Pre-Galv. 12 Gauge Steel Channel
RSB 1024PG 6 1 6-7/16″ 10″ 11″ 1,000 (4.4)*
RSB22424PG 12.4 2 6-7/16″ 22″ 23″ 2,000 (8.8)*
RSB33624PG 18.8 3 6-7/16″ 34″ 35″ 3,000 (13.3)*
RSB44824PG 25.2 4 6-7/16″ 46″ 47″ 4,000 (17.8)*
* This load is only for the capacity of the components in this assembly.
Please consult roofing manufacturer or engineer for roof load capacity.

 

Finish – Fitting: PG – Pre-galvanized Zinc
ASTM A653 G-90 Pre-galvanized zinc is produced by continuously rolling steel coils or sheets through molten zinc at the mills. The coils or sheets are slit to size and fabricated by forming, shearing or punching to produce the finished product. During fabrication cut edges are not generally zinc coated; however, the zinc near the uncoated metal becomes a sacrificial anode to protect the bare areas.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov